The correct cleaning method after fireworks

Jun 17, 2020

Leave a message

After the end, how to clean up the on-site waste in a regular way? After the pyrotechnics are ignited, the igniting personnel shall first close the igniting equipment and withdraw the wiring. During the operation process, special personnel shall be arranged to guard the site to prevent other mission personnel from entering the site. In general, the mission personnel only entered the fireworks lit-up place 30 minutes after the end of the pyrotechnic ignition, because objects such as unburnt gunpowder could be damaged, assuming that Mars was found, it should be suspended immediately, and a slightly larger fire can be used. Disposal of fire extinguishers and other equipment, the fire is too large, immediately call 119 to fight the fire.

After leaving the ignited place, check if there is a falling tube, and if so, it should be close to the side, and the firework should be disposed of immediately. At the end, the cooks on the splitter will receive the extensions in order, CABLE, and farewell. Prevent the head and hands from being placed above the gun barrel mouth and pyrotechnic spout during the whole process. 5. When the extension, CABLE and parting box are over, send someone to count and special guard. Then, the skill leader leads the team to check and pack the dumb and spent bombs. 6. During the cleaning process, the head and body are prevented from being placed above the barrel mouth and pyrotechnic vents. Use flashlights and afterglow to watch the color of the barrel mouth, Check the status of the cook to determine whether there are dumb or scrap bombs.

Be very careful when handling dumb and waste bombs, first determine that there are no sparks around, and then determine that the dumb and waste bombs have no sparks or smoke; if there is smoke, first soak the fireworks with a lot of water, and then take it out. During the whole process, pay attention to the charged objects such as flashlights, walkie-talkies, and mobile phones to prevent contact with the copper feet of the cook. The dumb ammunition and waste ammunition taken out are tightly packed in a carton, specially guarded, and returned to the warehouse for destruction or returned to the manufacturer for reprocessing. Other unlit candles, potted plants, etc. are also handled in reverse.

Assuming that the opening cannot be caused due to the elements of time, or because there are too many barrels, there are no lights and other elements, you can find someone to stay in the place, and dispose of the barrels and other equipment after dawn; maybe move the entire equipment back to the factory and then disassemble it . When packing the equipment, you should count the points one by one according to the previous equipment list to avoid losing items and equipment!